 |
|
 |
Memory Card
Your ZVUE 260 supports SD and MMC memory cards. SD (Secure Digital) and MMC (Multimedia Card) are small, easy to handle memory cards that you can store files
in to play on your ZVUE 260. SD and MMC cards are interchangeable and reusable.
Once your ZVUE 260 has power, insert your SD Memory Card. Hold the card so that
the label faces away from you and press in until it clicks. To eject the card, firmly
press it down until it clicks again.
Press and hold the power button for one second to turn on the player. Press and hold
the power button for three seconds to turn it off. Your ZVUE will shut down
automatically after one minute of inactivity.
How much memory will you need?
This chart gives approximate capacities for the common card sizes.
|
|
|
|
68 min |
44 |
544 |
128MB |
136 min |
88 |
1088 |
256MB |
272 min |
176 |
2176 |
512MB |
544 min |
352 |
4352 |
1GB |
1088 min |
704 |
8704 |
2GB |
How to use Memory Cards
1. Open the protective cover at the top of your ZVUE 260. Hold the card so that the
label faces you.
2. Insert the card in the slot. Press it until you feel it click into place. To remove the
card, press down on the card until it clicks again. The card will release automatically.
Using the Write Protect Tab
SD cards have Write Protect Tabs that will prevent the computer from copying or
deleting files to or from the card. The tabs are located on one of the long sides of the
cards. They can slide back and forth. There is usually an arrow that indicates what
direction the card locks, and in general the locked position is towards the center of the
card. To use the Write Protect Tab, slide the tab into the locked or unlocked position.
How to Reformat an SD/MMC Card
Reformatting a card helps to reset the card, which can be helpful if you want to
quickly erase everything on the card or if your card has been corrupted.
To reformat the card:
1. Use your SD Card Reader or connect the ZVUE 260 to your computer in
"Removable Disk" mode.
2. Right click on the removable disk icon in “My Computer.”
3. Select Format.
4. Under "File System" select "FAT32."
5. If you want, you can name the memory card by typing it into the
"Volume
Label” box.
6. Press Start.
7. After it has finished reformatting, you can continue with normal use of the card.
|
 |
